Equipment & technology
Advanced CNC equipment and technology.
97 CNC machines across milling, turning, Swiss and EDM, sized for everything from small precision parts to large structural work.
Milling
3-, 4-, 5-axis and 3+2 machining centres
Minimum tool diameter Ø0.50 mm across the milling fleet. Achievable surface finish depends on material and geometry.
Five-axis machining centres for complex geometry
Trunnion-table 5-axis and 3+2 centres cut deep pockets, angled faces and contoured surfaces in a single setup, holding tight tolerances on parts up to 2000 mm.
| Parameter | Capacity |
|---|---|
| Travel (X×Y×Z) | 2000×1200×800 mm |
| Min tool diameter | Ø0.50 mm |
| Surface finish | Ra 3.2 |
| Parameter | Capacity |
|---|---|
| Travel (X×Y×Z) | 1000×500×370 mm |
| Min tool diameter | Ø0.50 mm |
| Surface finish | Ra 1.6 |
| Parameter | Capacity |
|---|---|
| Travel (X×Y×Z) | 700×400×350 mm |
| Min tool diameter | Ø0.50 mm |
| Surface finish | Ra 3.2 |
| Parameter | Capacity |
|---|---|
| Travel (X×Y×Z) | 2500×1200×800 mm |
| Min tool diameter | Ø0.50 mm |
| Surface finish | Ra 1.6 |
A vertical machining line built for flow
The VMC line runs alongside process boards and in-line inspection bins, so multi-part jobs move predictably from setup to checked, finished work.
Turning
CNC turning & Swiss machining
From large chucked work to small-diameter Swiss parts
Turning centres handle shafts, housings and cylindrical parts up to Ø500 mm, while our Swiss machines hold accuracy on long, slender, small-diameter parts at volume.
| Parameter | Capacity |
|---|---|
| Max part diameter | Ø500 mm |
| Max part length | 580 mm |
| Max swing over carriage | 500 mm |
| Max spindle through-hole | Φ62 mm |
| Parameter | Capacity |
|---|---|
| Max bar capacity | Ø32–Ø42 mm |
| Max turning diameter | Ø125 mm |
| Max turning length | 320 mm |
| Guide bushing | Yes |
Bar-fed turning, staged for volume
Turning centres with bar feeders and staged work-in-process bins keep cylindrical parts running continuously, from first article through full production batches.
EDM
Sinker & wire EDM
For complex profiles, sharp internal corners and hardened materials beyond standard milling and turning.
Wire & sinker EDM for hardened, intricate work
Wire EDM cuts precision profiles to tight tolerance, and sinker EDM produces fine cavity detail in hardened tool steel.
| Parameter | Capacity |
|---|---|
| Table size | 1000×700 mm |
| Travel (X×Y×Z) | 700×400×300 mm |
| Max workpiece weight | 1,000 kg |
| Parameter | Capacity |
|---|---|
| Table size | 600×400 mm |
| Travel (X×Y×Z) | 400×300×250 mm |
| Max workpiece weight | 500 kg |
Larger or special-requirement parts may be possible, ask our engineering team at DFM review.
Sinker EDM for fine cavity detail
Copper electrodes sink sharp internal corners and fine cavity detail into hardened tool steel, geometry that standard milling and turning can't reach.
Get started
Have a part that needs the right machine?
Send your drawings and our engineering team will match it to the right process and quote within 48 hours.
Your drawings stay confidential.