Industry · Components only
Precision components for medical and laboratory equipment: instrument housings, fittings, manifolds, mounts and fixtures, machined to your drawing in metals and engineering plastics, inspected in-house, triple-certified (AS9100D / ISO 9001 / IATF 16949).
Diagnostic, analytical and laboratory equipment is full of machined parts: housings that align optics and electronics, fluidic manifolds, fittings, mounts and fixtures that have to be clean, corrosion resistant and dimensionally exact. Fenva machines those components to your drawing in stainless, aluminium, titanium and engineering plastics, with passivation and fine finishes for surfaces that wipe down clean. Send a drawing and you get a line-item quote in 48 hours, no minimum order quantity, prototype through to batch production.
To be clear about scope: we machine components for medical and lab equipment. We do not make finished medical devices, implants or surgical instruments, and we do not hold medical-device registration. If your component drawing defines the part, we make it to that drawing.
Parts & materials
| Component | Material we reach for | Why |
|---|---|---|
| Instrument housings & enclosures | 6061 / 316L | Light and economical, or corrosion resistant and easy to clean |
| Fluidic fittings & manifolds | 316L / PTFE | Corrosion resistant for fluids, or chemically inert and low-friction |
| Load-bearing & wear parts | 17-4PH | High-strength, heat-treatable stainless that resists wear |
| Lightweight & corrosion-critical parts | Titanium | Strong, light and highly corrosion resistant where it matters |
| Insulating & autoclavable parts | PEEK | Strong, autoclavable, electrically insulating high-performance plastic |
| Chemically inert seals & bushings | PTFE | Inert and low-friction for contact with reagents and fluids |
These are the common material grades we run most often. We also machine other grades on request.
Capability
In-house-managed passivation for 316/316L and 17-4PH removes free iron and restores the corrosion-resistant surface. Bead blast and fine finishes give clean, uniform, easy-to-wipe surfaces for equipment that gets cleaned often.
See the Finish LibraryDiagnostic and analytical instruments, laboratory and test equipment, fluid-handling and dosing systems, and optical and imaging assemblies, all as machined components rather than finished devices.
Stainless CNCProduction parts
Components for medical and lab equipment. Material and finish are taken from our production records.
Why Fenva
AS9100D, ISO 9001 and IATF 16949, with full material traceability.
Passivation and fine finishes for parts that get cleaned often. No minimum order quantity, prototype through to batch production.
We machine strictly to your drawing and take full responsibility for the result.
Mini-FAQ
No. We machine components for medical and laboratory equipment, such as instrument housings, fittings, manifolds, mounts and fixtures, to your drawing.
Yes, in-house-managed passivation for 316/316L and 17-4PH, plus bead blast and fine finishes for clean, easy-to-wipe surfaces.
Yes, both, along with the common metals. PEEK for strong, autoclavable insulating parts and PTFE for chemically inert, low-friction components.
No minimum order quantity. We take you from prototype through to batch production.
Get started
Upload your drawings for review and our engineering team will quote within 48 hours, no minimum order.
An NDA is available on request.